Salta al contenuto principale
Inglese
Cinese

Traduzione in corso passo 7

Passo 7
Open the hinge and carefully pop off the Upper LCD using your fingers. Gently remove the ribbon from the hinge. Though not required, the task of removing the ribbon cables becomes much easier once you remove the hinge barrel on the right side of the device.
  • Open the hinge and carefully pop off the Upper LCD using your fingers.

  • Gently remove the ribbon from the hinge.

  • Though not required, the task of removing the ribbon cables becomes much easier once you remove the hinge barrel on the right side of the device.

  • Do not lose the tiny fabric and rubber water-resistant rectangles that cover the two speakers; they often fall out once the speakers are removed.

  • The screen's cover glass can be replaced or transferred to your new screen. The cover is easily scratched by metal tools; use plastic or your fingernail to separate it.

  • Adhere the cover to the new screen by using thin adhesive around the edges, or by reusing the old adhesive.

  • To reinsert the hinge piece, open the console to the last click before it's completely flat.

打开铰链,用手指小心地弹出上部LCD显示屏。

轻轻地从铰链上取下色带。

不要丢掉覆盖两个扬声器的小布料和橡胶防水矩形; 一旦扬声器被卸下,它们经常掉下来。

屏幕的盖玻片可以更换或转移到新屏幕。 盖子很容易被金属工具刮伤; 用塑料或你的指甲把它分开。

通过在边缘周围使用薄粘合胶,或通过重新使用旧粘合胶,将盖子固定在新屏幕上。

[* black] Open the hinge and carefully pop off the Upper LCD using your fingers.
[* black] Gently remove the ribbon from the hinge.
[* icon_note] Though not required, the task of removing the ribbon cables becomes much easier once you remove the hinge barrel on the right side of the device.
[* icon_caution] Do not lose the tiny fabric and rubber water-resistant rectangles that cover the two speakers; they often fall out once the speakers are removed.
[* icon_reminder] The screen's cover glass can be replaced or transferred to your new screen. The cover is easily scratched by metal tools; use plastic or your fingernail to separate it.
[* black] Adhere the cover to the new screen by using thin adhesive around the edges, or by reusing the old adhesive.
[* icon_reminder] To reinsert the hinge piece, open the console to the last click before it's completely flat.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.