Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 27

Passo 27
The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself. Insert an opening pick under the Lightning cable where it meets the logic board. Slide the pick down and around the bend in the cable.
  • The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

  • Insert an opening pick under the Lightning cable where it meets the logic board.

  • Slide the pick down and around the bend in the cable.

La nappe du connecteur Lightning est collée à la coque avec de l'adhésif. Pour détacher l'adhésif, vous devez glissez un médiator entre la nappe et la coque. Soyez très prudent et veillez à ne pas couper la nappe du connecteur Lightning même.

Insérez un médiator sous le câble Lightning, là ou où il est en contact avec la carte mère.

Faites glisser le médiator vers le bas et le long du pli formé par la nappe.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.