Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 27

Passo 27
The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself. Insert an opening pick under the Lightning cable where it meets the logic board. Slide the pick down and around the bend in the cable.
  • The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.

  • Insert an opening pick under the Lightning cable where it meets the logic board.

  • Slide the pick down and around the bend in the cable.

Das Kabel zum Lightning Port ist mit etwas Kleber am Gehäuse festgeklebt. Um es abzulösen, musst du ein Plektrum zwischen Kabel und Gehäuse entlangschieben. Sei sehr vorsichtig und zerschneide nicht das Lightning Kabel selbst.

Setze ein Plektrum an der Stelle an, wo das Lightning Kabel auf das Logic Board trifft.

Schiebe das Plektrum weiter entlang und um die Biegung des Kabels.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.