Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 14

Passo 14
Use the flat end of a spudger to disconnect the front-facing camera connector from the  logic board. Pry up only on the connector—not on the socket itself. Fold the front-facing camera cable out of the way.
  • Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Fold the front-facing camera cable out of the way.

  • There is a bit of conductive adhesive between the gold-colored cable contacts. Be sure to apply pressure to readhere these contacts during reassembly.

使用撬棒平端将前置摄像头连接器从电路板上断开。

只在连接器上撬,不在插座本身上。

将前置摄像头电缆翻起。

金色电缆触点之间有一点导电胶。 在重新组装期间,务必施加压力以再次黏接这些触点。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.