Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 10

Passo 10
Use a tool that fits inside the bearing hole in the flange yoke. Strike that tool with a hammer to drive the U-joint down the opening. Shown here is the opposite end of the yoke. The U-joint is now flush with the yoke bearing hole. Position the yoke between two wooden blocks, let it rest on the trunions
  • Use a tool that fits inside the bearing hole in the flange yoke. Strike that tool with a hammer to drive the U-joint down the opening.

  • Shown here is the opposite end of the yoke. The U-joint is now flush with the yoke bearing hole.

  • Position the yoke between two wooden blocks, let it rest on the trunions

  • provide clearance to the bottom

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.