Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 9

Passo 9
Remove the yoke form the driveshaft by angling it so it will clear the bearing surface. Here is the flange yoke with the U-joint still attached. Here is the damage. Missing needles out of the bearing cup, worn trunions on the joint cross.
  • Remove the yoke form the driveshaft by angling it so it will clear the bearing surface.

  • Here is the flange yoke with the U-joint still attached.

  • Here is the damage. Missing needles out of the bearing cup, worn trunions on the joint cross.

  • Place the flange yoke between two blocks of wood. Leave enough space between the blocks to clear the bearing cup.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.