Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Use a socket and small extension to remove the bolts. Here is a view of the actual size of the bolt. The driveshaft flange yoke fits tightly on the rear axle pinion flange pilot. Do not hammer on the driveshaft or any of its components to disconnect the yoke from the flange. Pry only in the area shown, to disconnect the yoke from the flange.
  • Use a socket and small extension to remove the bolts.

  • Here is a view of the actual size of the bolt.

  • The driveshaft flange yoke fits tightly on the rear axle pinion flange pilot. Do not hammer on the driveshaft or any of its components to disconnect the yoke from the flange. Pry only in the area shown, to disconnect the yoke from the flange.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.