Traduci il passo n. 6 - Canon PowerShot SX120 IS Back Cover Replacement - iFixit

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida

Inglese

Italiano

Passaggio precedente Passo successivo

Traduzione in corso passo 6

Passo 6

Turn the camera with the lens facing down.

Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened.

Use the blue opening tool to make lever. Insert the opening tool in the seam where the front case and the back case assemble.

Turn the camera with the lens facing down.
Opening the camera can be challenging. Don't get discouraged if it takes you a few tries before the camera is opened.
Use the blue opening tool to make lever. Insert the opening tool in the seam where the front case and the back case assemble.
Carefully make pressure downwards on the opening tool so the cover can gradually open.
Keep making pressure and slowly slide the opening tool through all the gap.
There is one point when the cover will disassemble completely.
When you are dissembling the back cover, the DC IN A/V OUT DIGITAL cover will also disassemble and fall off.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.