Salta al contenuto principale
Inglese
Giapponese

Traduzione in corso passo 7

Passo 7
Pull back the electron tape covering the two screws on the screen display and remove the 1/4 screws with #0 Phillips screwdriver Remove the six 3/8 inch screws from the circuit board with a #2 Phillips screwdriver. There are fours screws in the corners.
  • Pull back the electron tape covering the two screws on the screen display and remove the 1/4 screws with #0 Phillips screwdriver

  • Remove the six 3/8 inch screws from the circuit board with a #2 Phillips screwdriver.

  • There are fours screws in the corners.

  • There are two screws in the middle (the wires have to be moved to see them).

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.