Salta al contenuto principale
Inglese
Giapponese

Traduzione in corso passo 5

Passo 5
Remove the two 5/16 inch screws from the speakers and the bottom of the device with a #2 Phillips screwdriver. Remove the two 5/16 inch screws from the speakers and the front of the device with a #2 Phillips screwdriver. Gently pull the back of the speaker up (like the speaker on the right side of the picture. Then pull it straight back (as shown with the speaker on the left side of the picture).
  • Remove the two 5/16 inch screws from the speakers and the bottom of the device with a #2 Phillips screwdriver.

  • Remove the two 5/16 inch screws from the speakers and the front of the device with a #2 Phillips screwdriver.

  • Gently pull the back of the speaker up (like the speaker on the right side of the picture. Then pull it straight back (as shown with the speaker on the left side of the picture).

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.