Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 3le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Remove the two black speaker screws shown in red circles in the first image using a Phillips #00 screwdriver. After unscrewing the screws from the previous step, lift out the speaker plate when it becomes loose enough. Open the multi-connector cover shown in the yellow square in the fourth image.
  • Remove the two black speaker screws shown in red circles in the first image using a Phillips #00 screwdriver.

  • After unscrewing the screws from the previous step, lift out the speaker plate when it becomes loose enough.

  • Open the multi-connector cover shown in the yellow square in the fourth image.

  • The multi-connector compartment is used to connect an AV cable to another device. The multi-connector has a waterproof cover and also allows the device to display pictures on a television screen.

  • The side panel that covers the multi-connector and the speaker can be detached by sliding the side panel off of the device.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.