Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Using the #0 Phillips head screwdriver, unscrew the two (5 mm) screws that fasten the optical drive into its port. Gently pull the optical drive through the frontal cavity. Gently pull the optical drive through the frontal cavity.
  • Using the #0 Phillips head screwdriver, unscrew the two (5 mm) screws that fasten the optical drive into its port.

  • Gently pull the optical drive through the frontal cavity.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.