Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Remove the two screws above the LCD screen with a Phillips #00 screw driver.  These connect to the white plastic cover in which the speaker is housed located on the reverse side of the logic board.
  • Remove the two screws above the LCD screen with a Phillips #00 screw driver. These connect to the white plastic cover in which the speaker is housed located on the reverse side of the logic board.

  • Make sure the white plastic cover remains in contact with the logic board while removing the screws.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.