Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 2

Passo 2
Peel back the tape covering the top of the keyboard ribbon cable connector. Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Peel back the tape covering the top of the keyboard ribbon cable connector.

  • Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Use the flat end of a spudger to push the keyboard ribbon cable out of its socket.

剥开覆盖键盘带状电缆连接器顶部的胶带。

使用挑线器的扁平端将键盘带状电缆ZIF插座上的固定挡板翻起来。

确保你在铰链固定盖上撬动,而不是插座本身。

使用挑线器的扁平端将键盘带状电缆从插座中推出。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.