Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 45le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
  • Use a spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.

  • The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.

  • To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

Usa la punta di uno spudger per staccare i tre cavi dell'antenna AirPort dalle loro sedi sulla scheda AirPort.

[* black] Use the tip of aa spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
[* icon_caution] The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.
[* icon_reminder] To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.
[* black] Use the tip of aa spudger or tweezers to pry the three AirPort antenna cables straight up off of their sockets on the AirPort board.
[* icon_caution] The cable connection points are fragile. Be careful to lift only on the connector, and not on the socket or cable.
[* icon_reminder] To reconnect, align the connector carefully into position over the socket, and press it down firmly with the flat of your spudger.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.