Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Now, lift from the right side the board, and be careful, below is the LCD connector. It´s turn to the HOT STATION. If you don´t have one of this, you can do it with a Hairdryer or a Heat gun
  • Now, lift from the right side the board, and be careful, below is the LCD connector.

  • It´s turn to the HOT STATION. If you don´t have one of this, you can do it with a Hairdryer or a Heat gun

  • I don´t have any photo of the proccess, so I´m sorry for that. You must heat all the LCD area, and with special attention on the top and bottom areas.

  • Please be careful with the 2 lower buttons, they have this orange flat cable!!

  • As you can see, the LCD is totally destroyed, but it was broken before, so...

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.