Salta al contenuto principale
Inglese
Tedesco

Traduzione in corso passo 2

Step 2
Now, with a flat screwdriver or the plastic triangle, separate the rear case from the front case. Here we have the call speaker. Its glued to the front, so we have to release it or desolder the 2 knobs on the flex cable. Here we have the call speaker. Its glued to the front, so we have to release it or desolder the 2 knobs on the flex cable.
  • Now, with a flat screwdriver or the plastic triangle, separate the rear case from the front case.

  • Here we have the call speaker. Its glued to the front, so we have to release it or desolder the 2 knobs on the flex cable.

Trenne mit einem Pick oder einem flachen Schraubendreher das vordere vom hinteren Gehäuseteil.

Hier sehen wir den Lautsprecher. Er ist an der vorderen Gehäuseseite verklebt, um ihn zu entfernen, müssen wir den Kleber lösen oder die Lötpunkte auf dem Flexband-Kabel.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.