Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 10

Passo 10
Flip the logic board up toward the volume control buttons to expose the antenna connector. Do not try to remove the logic board from the rear case yet, as it is still connected by an antenna cable on the back.
  • Flip the logic board up toward the volume control buttons to expose the antenna connector.

  • Do not try to remove the logic board from the rear case yet, as it is still connected by an antenna cable on the back.

Hebe das Logic Board in Richtung der Lautstärkeregelungsknöpfe an um den Stecker des Antennenkabels freizulegen.

Entferne das Logic Board noch nicht ganz. Es ist immer noch mit dem Gehäuse über das Antennenkabel verbunden.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.