Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up. The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.
  • Use a spudger to disconnect the Lightning connector ribbon cable from its socket on the logic board.

  • The Lightning connector cable is lightly adhered to a shield on the logic board. Use the flat end of a spudger to gently peel the cable up.

Verwende einen Spudger um das Lighting Connector-Kabel aus seiner Halterung auf dem Logic Board zu entfernen.

Das Kabel des Lightning Connectors ist leicht an eine Abdeckung überhalb des Logicboards geklebt. Löse es vorsichtig mit dem flachen Ende eines Spudgers.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.