Salta al contenuto principale
Inglese
Tedesco

Traduzione in corso passo 12

Passo 12
Flip the logic board up toward the volume control buttons to expose the antenna connector. Do not try to remove the logic board from the rear case yet, as it is still connected by an antenna cable on the back.
  • Flip the logic board up toward the volume control buttons to expose the antenna connector.

  • Do not try to remove the logic board from the rear case yet, as it is still connected by an antenna cable on the back.

Klappe das Logic Board nach oben Richtung der Lautstärkeregelungsktasten, um den Antennenstecker freizulegen.

Versuche noch nicht das Logic Board vom hinteren Gehäuse zu entfernen, da es noch durch das Antennenkabel auf der Rückseite verbunden ist.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.