Salta al contenuto principale
Inglese
Spagnolo

Traduzione in corso passo 5

Passo 5
To protect the solder job, you will need to slide the shrink wrap over the patch, then heat it so that it grips the wire securely. You can use a heat gun or the flat side of a soldering iron. Be careful to not let it burn! Repeat for the other wire. Repeat for the overall sheath. Repeat for the other wire. Repeat for the overall sheath.
  • To protect the solder job, you will need to slide the shrink wrap over the patch, then heat it so that it grips the wire securely. You can use a heat gun or the flat side of a soldering iron. Be careful to not let it burn!

  • Repeat for the other wire. Repeat for the overall sheath.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.