Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Once the plastic housing has been removed from the main phone body flip it over to expose the antenna circuit board. Use the plastic opening tool to remove the antenna circuit board from the plastic housing. This component is held in place with plastic clips and not adhesive. Simply place the safe open pry tool next to the indicated clip and press on it lightly. The antenna board should pop free.
  • Once the plastic housing has been removed from the main phone body flip it over to expose the antenna circuit board.

  • Use the plastic opening tool to remove the antenna circuit board from the plastic housing. This component is held in place with plastic clips and not adhesive.

  • Simply place the safe open pry tool next to the indicated clip and press on it lightly. The antenna board should pop free.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.