Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 3

Passo 3
Keep holding the partially separated panel open. It's easiest to do this by wedging a spudger into the opening but can also be held open by your hands. Rotate the Xbox to the left to locate the clip connecting the front panel to the body. Insert the spudger inside the gap to release the clip. This may require wiggling the spudger. The clip will pop off, making the front panel looser. Rotate the Xbox to the left to locate the clip connecting the front panel to the body. Insert the spudger inside the gap to release the clip. This may require wiggling the spudger. The clip will pop off, making the front panel looser.
  • Keep holding the partially separated panel open. It's easiest to do this by wedging a spudger into the opening but can also be held open by your hands.

  • Rotate the Xbox to the left to locate the clip connecting the front panel to the body. Insert the spudger inside the gap to release the clip. This may require wiggling the spudger. The clip will pop off, making the front panel looser.

Gardez le panneau partiellement séparé ouvert. Il est plus facile de le faire en plaçant un spudger dans l'ouverture, mais vous pouvez également le tenir ouvert avec vos mains.

Faites pivoter la Xbox vers la gauche pour localiser le clip reliant le panneau avant au corps. Insérez le spudger dans l’espace pour libérer le clip. Cela peut nécessiter de remuer le spudger. Le clip se détache, ce qui rend le panneau avant plus souple.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.