Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 7

Passo 7
Slide the spudger firmly along the right side of the battery, loosening the adhesive between the casing and battery. Flex cables run vertically down the phone underneath the battery and can be damaged easily. Make sure to only place the spudger in the indicated area. Insert the spudger in the bottom-center to further loosen the adhesive. Carefully separate the battery from the phone by sliding the spudger vertically underneath the battery and prying up. This may take some time and work as the adhesive is very strong.
  • Slide the spudger firmly along the right side of the battery, loosening the adhesive between the casing and battery.

  • Flex cables run vertically down the phone underneath the battery and can be damaged easily. Make sure to only place the spudger in the indicated area.

  • Insert the spudger in the bottom-center to further loosen the adhesive. Carefully separate the battery from the phone by sliding the spudger vertically underneath the battery and prying up. This may take some time and work as the adhesive is very strong.

Faites glisser le spudger (outil de câblage) fermement le long du côté droit de la batterie, desserrant l'adhésif entre le boîtier et la batterie.

Des câbles plats sont tracés verticalement sur le téléphone sous la batterie et peuvent être facilement endommagés. Assurez-vous de ne placer le spudger (outil de câblage) que dans la zone indiquée.

Insérez le spudger (outil de câblage) en bas du centre pour desserrer davantage l'adhésif. Séparez soigneusement la batterie du téléphone en faisant glisser le spudger (outil de câblage) verticalement sous la batterie et faisant levier. Cela peut prendre du temps et du travail car l'adhésif est très fort.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.