Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 11

Passo 11
Insert and tighten all the screws carefully. They are quite small, and the PCB may be damaged if the screws are over tightened. Tighten the screws in an alternating pattern.  E.G.  Top left, Bottom right, Top right, Bottom left. With more than 4 screws, use a "Star" pattern when tightening the screws ensuring all screws are evenly tightened.
Reinstalling Fans/ Cleaning GPU
  • Insert and tighten all the screws carefully. They are quite small, and the PCB may be damaged if the screws are over tightened.

  • Tighten the screws in an alternating pattern. E.G. Top left, Bottom right, Top right, Bottom left. With more than 4 screws, use a "Star" pattern when tightening the screws ensuring all screws are evenly tightened.

  • Clean off any noticeable dust on the GPU.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.