Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Inglese
Giapponese

Traduzione in corso passo 4

Passo 4
Using a Phillips #1 screwdriver, remove the three 5mm screws holding the keyboard in place. Carefully lift the keyboard up (no more than a few cm) and slide it forward, towards the laptops monitor to reveal another larger ribbon cable. Be extremely careful as the keyboard is still attached to the computer by the larger ribbon cable.
  • Using a Phillips #1 screwdriver, remove the three 5mm screws holding the keyboard in place.

  • Carefully lift the keyboard up (no more than a few cm) and slide it forward, towards the laptops monitor to reveal another larger ribbon cable.

  • Be extremely careful as the keyboard is still attached to the computer by the larger ribbon cable.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.