Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 3

Passo 3
Locate the  ribbon cable attached to the underside of the plastic panel. Using a spudger, unplug the ribbon cable by pushing the brown tab away from circuit board and sliding the ribbon out with your hand. Set the plastic panel aside.
  • Locate the ribbon cable attached to the underside of the plastic panel.

  • Using a spudger, unplug the ribbon cable by pushing the brown tab away from circuit board and sliding the ribbon out with your hand.

  • Set the plastic panel aside.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.