Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 6le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Unscrew the single captive Phillips #000 screw securing the home button cable. The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.
  • Unscrew the single captive Phillips #000 screw securing the home button cable.

  • The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.

  • If your replacement part does not have this captive screw and spring contact, you will need to transfer them to the new cable.

Rimuovere la singola vite Philips #000 tenendo facendo attenzione al cavo del pulsante Home.

Durante il riassemblaggio assicurarsi che il contatto sia nella giusta direzione, dal lato della vite più vicina all'LCD.

[* red] Unscrew the single captive Phillips #000 screw securing the home button cable.
[* icon_reminder] The captive screw is fastened to the home button cable by a spring contact backing. During reassembly, ensure the contact is in the correct orientation—on the side of the screw nearest the LCD.
[* icon_reminder] If your replacement part does not have this captive screw and spring contact, you will need to transfer them to the new cable.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.