Salta al contenuto principale

iPad Wi-Fi Ambient Light Sensor Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
iPad Wi-Fi Ambient Light Sensor Replacement: passo 0, immagine 1 di 3 iPad Wi-Fi Ambient Light Sensor Replacement: passo 0, immagine 2 di 3 iPad Wi-Fi Ambient Light Sensor Replacement: passo 0, immagine 3 di 3
  • If you are reusing the LCD, it is not necessary to peel the ambient light sensor off the back face of the LCD.

  • Use the edge of a plastic opening tool to carefully pry the ambient light sensor board off the adhesive securing it to the display frame.

  • Once you've gained enough clearance, peel the ambient light sensor off the LCD.

  • Be careful not to crease the ambient light sensor below its top section, as the portion with adhesive applied may break off.

  • If necessary, attach the plastic view window to your new ambient light sensor before installation.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.