Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Peel the back off of the new traction pad to reveal the adhesive. When placed, the traction pad should be about an inch away from the rear binding. To avoid creating air bubbles, start with one corner of the pad and roll the rest down.
  • Peel the back off of the new traction pad to reveal the adhesive.

  • When placed, the traction pad should be about an inch away from the rear binding.

  • To avoid creating air bubbles, start with one corner of the pad and roll the rest down.

  • Press down firmly to help it stick to the board and remove any air bubbles that may have occurred.

  • Give the adhesive a minimum of 12 hours to dry before use.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.