Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 4

Passo 4
With one spudger, work your way along the right edge of the iPad. The front panel is held to the aluminum back by metal clips on the top, bottom, and left sides.  The right side has plastic tabs which slide into recesses in the backplate.
  • With one spudger, work your way along the right edge of the iPad.

  • The front panel is held to the aluminum back by metal clips on the top, bottom, and left sides. The right side has plastic tabs which slide into recesses in the backplate.

  • Once the clips are released, lift the left side of the front panel up and slide it to the left to clear the tabs from the aluminum backplate.

  • Pry carefully and gently—if you feel resistance, stop and pry at another spot.

スパッジャーを使って、iPadの右端に沿ってスライドします。

フロントパネルは、上部、下部、左側に付けられたメタル製クリップでアルミニウムの背面に固定されています。 右側には、バックプレートの凹みにスライドするためのプラスチックのタブが付いています。

クリップ全部が外れたら、フロントパネルの左側を持ち上げて、左側にスライドし、アルミ製バックプレートからタブを外します。

慎重かつゆっくりとこじ開けてください。抵抗を感じたら、その場で作業を中止して、別の場所に移動して再試行してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.