Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Use the following steps to install the old trackpad into your new upper case. Reinstall the T6 Torx set screw until it is flush with the aluminum bracket surrounding the trackpad.
  • Use the following steps to install the old trackpad into your new upper case.

  • Reinstall the T6 Torx set screw until it is flush with the aluminum bracket surrounding the trackpad.

  • Place the trackpad back into its void in the upper case, being sure the lower tabs are inserted underneath the keyboard side of the upper case.

  • Be sure the trackpad ribbon cable is not pinched between the trackpad and the upper case.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.