Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 10

Passo 10
Replace the rubber o-ring gasket around the lid of the oil filter housing cover. Never re-use the old one. Use a small needle nose plier or a small flat blade screwdriver to help remove the old gasket.
  • Replace the rubber o-ring gasket around the lid of the oil filter housing cover. Never re-use the old one.

  • Use a small needle nose plier or a small flat blade screwdriver to help remove the old gasket.

  • Lightly coat the new gasket with some of the new motor oil to help it seal properly.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.