Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 1

Passo 1
If you're installing a new front panel assembly, it may need the following preparation: Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
  • If you're installing a new front panel assembly, it may need the following preparation:

  • Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.

  • Remove the small piece of adhesive backing from the digitizer cable.

  • Make sure all copper is covered on the new replacement screen as once fitted without this the screen will move randomly.

Si vous installez un nouveau panneau frontal complet, il peut être nécessaire de procéder comme suit :

Décollez les bandes plastiques recouvrant l'adhésif autour du panneau frontal.

Retirez le petit morceau de ruban adhésif sur la nappe de la vitre tactile.

Assurez-vous que tout le cuivre est recouvert sur l'écran de remplacement. Autrement, l'écran se déplacerait au hasard, une fois installé.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.