Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
Remove the following five screws:
-
One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).
-
Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.
-
One 10 mm Phillips near the optical drive.
-
One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.
-
Lift the EMI fingers above the battery connector away from the metal framework.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.