Skip to main content
Inglese
Italiano

Traduzione in corso passo 2

Step 2
Remove the three screws holding metal plate, one on the top in the middle, and two at the bottom by the main cable.
  • Remove the three screws holding metal plate, one on the top in the middle, and two at the bottom by the main cable.

  • Push the metal plate towards bottom of the monitor to release it from clips and remove.

  • After popping off (removing) metal plate, you can now see all inner components, where the USB connector is on left side.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.