Skip to main content
Inglese
Italiano

Traduzione in corso passo 4

Step 4
Lift the fan shroud and fan straight up and out. Take care to disconnect the indicated connector Remove the heatsink clamps with a flathead screwdriver and do the same for the other side. Lift off the heatsink and remove the 4 screws of the CPU board.
  • Lift the fan shroud and fan straight up and out. Take care to disconnect the indicated connector

  • Remove the heatsink clamps with a flathead screwdriver and do the same for the other side.

  • Lift off the heatsink and remove the 4 screws of the CPU board.

  • There are 4 pins: remove the 3 pins near the RAM but not the pin nearest You.

  • You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.