Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 12

Passo 12
Cover up with electrical tape the rest the white and black/outer cable you just soldered. Join them together with electrical tape as to form one cable and place the AC charger in one of the faces of the plastic enclosure. White electrical tape makes this fix look nicer.
  • Cover up with electrical tape the rest the white and black/outer cable you just soldered.

  • Join them together with electrical tape as to form one cable and place the AC charger in one of the faces of the plastic enclosure.

  • White electrical tape makes this fix look nicer.

  • Take 3 small zip ties and tie them around the cable to stop it from being pulled out of the plastic enclosure.

Recouvrez de scotch électrique le fil blanc et le fil noir que vous venez de souder.

Joignez-les avec le ruban isolant pour qu'ils ne fassent plus qu'un seul câble et mettez le chargeur AC dans l'une des deux moitiés de la coque plastique.

Si votre scotch est blanc, la réparation se verra moins.

Prenez trois attaches rapides et mettez-les autour du câble pour éviter qu'il ne soit arraché de la coque plastique.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.