Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 11

Passo 11
Proceed to solder the black cable from the AC charger to the outer wire of your Macbook connector. Isolate that wire. You don't need to cover up the whole extension of the outer wire, just enough so that it won't touch the white cable or the circuit board of the AC adapter. You can use the black rubber tube or  electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.
  • Proceed to solder the black cable from the AC charger to the outer wire of your Macbook connector.

  • Isolate that wire. You don't need to cover up the whole extension of the outer wire, just enough so that it won't touch the white cable or the circuit board of the AC adapter.

  • You can use the black rubber tube or electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.

Procédez à souder le câble noir du chargeur AC au fil extérieur de votre connecteur Macbook.

Isolez ce fil. Vous n'avez pas besoin de recouvrir tout le fil, juste assez pour qu'il ne touche ni le fil blanc ni le circuit imprimé de l´adaptateur secteur.

Vous pouvez utiliser de la gaine thermorétractable ou du ruban électrique. Si vous utilisez de la gaine thermo, maintenez-la le plus loin possible du fer quand vous soudez, pour éviter de la rétracter avant qu'elle ne recouvre le fil.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.