Salta al contenuto principale
Inglese
Spagnolo

Traduzione in corso passo 4

Passo 4
With a flat headed screwdriver start separating both plastic faces from the charger. You need to use a little force to do this. Once you have separated all sides with the screw driver, it still wont come off. This thing is glued to all sides of the plastic. Insert the screwdriver into the top part of the charger and carefully separate the foil from the plastic enclosure. Be careful as to not rip off the foil from the inner part of the charger.
  • With a flat headed screwdriver start separating both plastic faces from the charger. You need to use a little force to do this.

  • Once you have separated all sides with the screw driver, it still wont come off. This thing is glued to all sides of the plastic.

  • Insert the screwdriver into the top part of the charger and carefully separate the foil from the plastic enclosure. Be careful as to not rip off the foil from the inner part of the charger.

Con un destornillador de punta plana comienza a separar las caras de plástico del cargador. Necesitarás aplicar un poco de fuerza para hacerlo.

Una vez que ya hayas separado las caras con el desatornillador, estas seguirán sin desprenderse del cuerpo. Esa cosa está pegada con adhesivo en todas las partes del plástico.

Inserta el desatornillador dentro de la parte superior del cargador y cuidadosamente separa la lámina de la cubierta plástica. Ten mucho cuidado de no desprender la lámina interna del cargador en el proceso.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.