Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 3

Passo 3
Look at the line that goes though the charger. This is all glued with some super adhesive that prevents you from just taking it apart. You will have to cut through that plastic, go all the way around following that small space with your knife. This will take a while, you have to cut the plastic from all the 4 sides. You will notice when you have cut through most of it.
  • Look at the line that goes though the charger. This is all glued with some super adhesive that prevents you from just taking it apart.

  • You will have to cut through that plastic, go all the way around following that small space with your knife.

  • This will take a while, you have to cut the plastic from all the 4 sides. You will notice when you have cut through most of it.

  • Be careful with the side shown in the last picture. There are a couple of components that might be cut in the process.

Regardez la ligne qui va d'un bout à l'autre du chargeur. Il y a un super adhésif qui vise à vous empêcher de démonter le chargeur.

Il va falloir couper à travers ce plastique. Coupez tout le long de cette ligne avec un cutter.

Ça peut prendre un peu de temps de couper sur les quatre côtés, mais vous saurez quand vous aurez presque tout coupé.

Faites attention pour le côté montré dans la dernière image. Il y a quelques composants qui pourraient être coupés...

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.