Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 12

Passo 12
Carefully maneuver the logic board out of the outer case, minding the cables still connecting the two components. To gain more clearance, remove the small strip of black tape securing the USB ribbon cable to the battery bracket. Use a pair of tweezers to pull the USB ribbon cable connector away from its socket.
  • Carefully maneuver the logic board out of the outer case, minding the cables still connecting the two components.

  • To gain more clearance, remove the small strip of black tape securing the USB ribbon cable to the battery bracket.

  • Use a pair of tweezers to pull the USB ribbon cable connector away from its socket.

  • Pull the battery connector out of its socket on the logic board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.