Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 11

Passo 11
Remove the four silver Phillips screws attaching the logic board to the outer case. To remove the logic board, you must first de-solder the leads of both microphones from the logic board. When soldering on a circuit board, be sure not to heat up the connection excessively. Use a pair of tweezers to gently pull each lead as you heat up the joint with the tip of a soldering iron.
  • Remove the four silver Phillips screws attaching the logic board to the outer case.

  • To remove the logic board, you must first de-solder the leads of both microphones from the logic board. When soldering on a circuit board, be sure not to heat up the connection excessively.

  • Use a pair of tweezers to gently pull each lead as you heat up the joint with the tip of a soldering iron.

  • Repeat this process to remove all four microphone leads. Their locations are boxed in orange on the first picture.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.