Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Use a spudger to gently pry the button assembly cable up from its socket on the logic board. Be very careful to only pry up on the connector and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.
  • Use a spudger to gently pry the button assembly cable up from its socket on the logic board.

  • Be very careful to only pry up on the connector and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

Benutze einen Spudger, um vorsichtig den Button aus seiner Fassung auf dem Logic Board zu hebeln.

Achte darauf, dass du nur den Anschluss nach oben hebelst und nicht die Fassung auf dem Logic Board. Wenn du die Fassung des Logic Boards hochhebelst, kann der Anschluss gänzlich brechen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.