Salta al contenuto principale
Inglese
Tedesco

Traduzione in corso passo 3

Passo 3
Remove the two 3.8mm PH1 screws with a Philips Head screw driver holding the right screen bracket in place. Again, wires may be blocking the accessibility to the screws, therefore you may need to move the wires around till you can access the screws. While removing the last screw, hold the screen steady with one hand to avoid binding the last screw or letting the screen fall.
  • Remove the two 3.8mm PH1 screws with a Philips Head screw driver holding the right screen bracket in place.

  • Again, wires may be blocking the accessibility to the screws, therefore you may need to move the wires around till you can access the screws.

  • While removing the last screw, hold the screen steady with one hand to avoid binding the last screw or letting the screen fall.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.