Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 6

Passo 6
Flip the iPhone back over and insert a plastic card between the case side of the battery and the rear case.
  • Flip the iPhone back over and insert a plastic card between the case side of the battery and the rear case.

  • Do not pry against the logic board or you may damage the phone.

  • Avoid prying at the top left near the volume controls, or you may damage the volume button ribbon cable.

  • Keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals or catch fire. Do not use any sharp tools to pry at the battery.

  • Press the card in farther to break up the adhesive behind the battery.

  • Alternatively, a piece of dental floss may be used to separate the battery from the rear case. A stronger alternative to dental floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

  • Thread the floss or string behind the upper battery corners, bring the ends together, wrap them around a folded cloth, and pull evenly.

在电池与后盖中间插入一块塑料卡片

不要用力撬主板,否则有可能会伤害手机

避免撬开电池的左上方靠近音量按键的地方,否则可能损害音量按键的排线

保持卡片水平,以免弯折电池,造成电池损伤,释放有毒的化学物质或着火

尽量深的插入卡片来分离电池背面的胶带

你可以选择用一条牙线来分开电池与后盖,更好的选择是用一条吉他弦,例如一套12弦中的0.009 E 弦

在电池顶部与后盖之间穿入一条牙线或者弦,首尾放在一起,然后用折叠的布料包起来,均匀的用力拉

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.