Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 7

Passo 7
Pull the battery out of the rear case. If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable. When installing the battery, refer to this guide to replace your battery's adhesive strips.
  • Pull the battery out of the rear case.

  • If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable.

  • When installing the battery, refer to this guide to replace your battery's adhesive strips.

  • Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

リアケースからバッテリーを取り出します。

交換用バッテリーにプラスチックのスリーブが付いている場合は、交換作業前にリボンケーブルから引き抜いてスリーブを外してください。

交換用バッテリーを装着する際は、バッテリーに付ける接着タブを交換する必要があります。こちらのガイドを参照ください。

再組み立てが完了したらハードリセットを行ってください。これは幾つかの問題を防ぐとともに、トラブルシューティングを簡単にしてくれます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.