Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 32le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 8

Passo 8
Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them. Pull the plastic nub to release the vacuum seal on the suction cup.
  • Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.

  • Pull the plastic nub to release the vacuum seal on the suction cup.

  • Remove the suction cup from the screen.

Versuche nicht, die Display Einheit vollständig vom hinteren Gehäuse zu lösen, da beide immer noch durch mehrere Flachbandkabel verbunden sind.

Ziehe an an der Kunststoffnoppe, um das Vakuum des Saugnapfes zu öffnen.

Entferne den Saugnapf von der Display Einheit.

[* icon_caution] Do not try to completely remove the front panel assembly from the rear case, as there are several delicate ribbon cables connecting them.
[* black] Pull the plastic nub to release the vacuum seal on the suction cup.
[* black] Remove the suction cup from the display assemblyscreen.
[* black] Remove the suction cup from the display assemblyscreen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.