Teenage Engineering OP-1 Connector Board Replacement

Torna alla Guida

Inglese

Giapponese

Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2

Teenage Engineering OP-1 Connector Board Replacement, Remove Connector Board: passo 0, immagine 1 di 3

Teenage Engineering OP-1 Connector Board Replacement, Remove Connector Board: passo 0, immagine 2 di 3

Teenage Engineering OP-1 Connector Board Replacement, Remove Connector Board: passo 0, immagine 3 di 3

Remove Connector Board

Disconnect the flex connector by lifting it up with a spudger.
Remove the three Phillips screws. Do not lose the washer at the bottom screw.
Take out the connector board.
Make sure to keep the black rubber pad underneath the board.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.