Skip to main content
Inglese
Italiano

Traduzione in corso passo 2

Step 2
CAUTION: Even though the heat-sink assembly has a protective plastic covering, be careful when touching it -- the assembly may still be hot if your PC was just on.
Remove the Heat Sink
  • CAUTION: Even though the heat-sink assembly has a protective plastic covering, be careful when touching it -- the assembly may still be hot if your PC was just on.

  • Release the blue plastic secure lever under the heat-sink assembly by pushing the tab and pivoting the lever down and away from the assembly.

  • Remove the two screws located at the top and bottom of the heat-sink assembly using a standard Phillips-head screwdriver.

  • Pull the heat-sink assembly off the board as if it were a door with its hinges on the right.

  • Clean the old thermal paste from the contact points on the heat sink

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.